Tire shaping and Curing Press-63.5" Mechanical type (assembling in workshop)

1.For PCR,LTR tire 16"-24.5" 2.Dome type, twin mold 3.High-precision machining 4.PLC and touch screen control

This Curing Press is appliable for curing TBR,LTR and bias tyres with Nitrogen or steam as curing medium.This Curing Press is a mechanical type, the beam moves vertically and horizontally for tyre loading and unloading. The center mechanism is BOM type and the curing mould is heated by Dome. Other features: Single- or Dual-Column Vertical Chuck Loader, Dual-Cylinder Unloading Device, Pro-Bar Style Mould Stripping Unit.As per customer's request, Auto-Adjusting Device, SMO Drive Device, PCI and Green TyreHolder are available. Curing Piple can also be made into order. This Curing Press uses PLC for real-time control, and industrial PC for Human-Machine Operation Interface.All parameters can be re-set during Curing Cycle, and real-time data collection/preservation,alarming,as well as data back dating can also be realized through this system. With ethernet interface,Curing Press group-management is available.Brief Technical Parameters:

1	Type of Cured Tire		Common and Radial Tire
2	Heating Type		Dome
3	Number of Mould		2
4	Type of Center Mechanism		BOM
5	I.D. of Mould Shield		1525mm
6	Max. Mould closing force		4300kN  X  2
7	Height of Mould		254-635mm
8	Max Mould Weight		6500kgs
9	Diameter of Bead		16-24.5
10	Max. Height of Green Tire		750mm
11	Max. OD of Cured Tire	Two-piece Mold	1235mm
		Segmental Mold	1135mm
12	Max.Section Width of Cured Tire		490mm
13	Designed Mould Open/Close time		72s
14	Max Load of VCL		110kgs
15	Max External Pressure		1.4Mpa
16	Max.Internal Pressure		2.8Mpa
17	Hydraulic Water Pressure		2.1-2.5Mpa
18	Compressed Air Pressure		0.7Mpa
19	Control Air Pressure		0.35Mpa

* Our Curing Press range is from 42" to 108".

Tire shaping and Curing Press-63.5" Mechanical type (assembling in workshop)